Lupine Publishers | Synthesis of C-6 Methyl Substituted Benzothiazole Derivatives and Antifungal Activity against Aspergillus Niger

 Lupine Publishers | Journal of Skin Diseases

Abstract

Life-threatening illness occurs due to Aspergillus species cause a spectrum of disease ranging from airway colonization. In case of respiratory tract, aspergilloma is the most common form of pulmonary involvement, which is usually accompanied by preexisting lung disease finally architectural abnormalities most commonly stem from tuberculosis, although other associated conditions, such as sarcoidosis, bronchiectasis, and neoplasm, have been documented.

Methodology: The present work comprised of synthesis and cyclization of substituted benzothiazole nucleus by reaction of substituted aniline with potassium thiocynate in presence of bromine in glacial acetic acid and ammonia under temperature control. Substituted benzothiazole then condensed with 2 (3 or 4)-nitrobenzoylchloride acid in presence of dry pyridine and acetone to get substituted nitrobenzamides. To the above product 2-nitroaniline, 3-nitroaniline, 4-nitroaniline in presence of DMF were treated to get newly synthesized derivatives (D-1 to D-09) through replacing at 7th position chlorine. Antifungal activity was performed against Aspergillus Niger by cup plate method (diffusion technique) using Griseoflavin as standard.

Result: Among, all newly synthesized derivatives compound D-5 showed potent antifungal activity against activity. Aspergillus Niger while compound D-6, D-8 and D-9 showed moderate inhibitory activity at both concentrations 50μg/ml and 100μg/ml as compared to standard.

Conclusion: In the present work efforts have been made to synthesized newer derivatives having methyl substitution at C-6 position of benzothiazole while 2-(3 or 4)-aryl-NO2 considered as rotating substitution at C-2 and C-7 position of benzothiazole nucleus to find out influence of activity due to change in substitution position against Aspergillus Niger .

Keywords: Benzothiazole; Antifungal activity; 2-Substituted benzothiazole; 7-Substituted benzothiazole; Nitro benzothiazole; Cyclization of benzothiazole nucleus; Aspergillus Niger; Cup plate method (diffusion technique)

Introduction

Fungi of the genus Aspergillus are ubiquitous saprophytic and widespread presence in the environment; hundreds of Aspergillus spp. inhaled may by the average person per day [1]. Mucociliary clearance and phagocytosis by alveolar macrophages, basically involved to remove Aspergillus spp. from respiratory tract (RT), while polymorph nuclear neutrocytes cleared germinating spores and hyphae through degranulation and the release of oxidants [2]. Aspergillus spp. is capable to colonize in RT, even presence of these effective clearance mechanisms in the body for the elimination of inhaled fungi from the respiratory tracts of healthy individuals. The main target site of colonizing of Aspergillus spp. is injured lung tissue and epithelia. Although such colonization often has no clinical consequences, Aspergillus spp. can cause a variety of clinical manifestations depending on the immune status of the host [3,4]. Aryl nitro substitution at C-2 and C-7 position together with their parental nucleus benzothiazole constitute an important group of synthetic products that are of particular interest owing to their wide ranging biological activities [5-9]. Their principal medicinal role is reportedly in the field of medicinal chemistry. The biological activities of some of these compounds were previously evaluated for anti-tumor, anti-inflammatory, antibacterial and anti fungal activity [10-14]. In, the recent era development of resistance against existing antibacterial and anti-fungal agents, created demand of new research to combat the developed resistance with efficacy and safety. The synthesis of benzothiazole is an area of current interest because it belongs to an important class of heterocyclic compounds that found to be effective as antimicrobial and anti-inflammatory agents [15-18]. At present several methods for the synthesis and cyclization of benzothiazole have been reported. Since individual method has its own advantages and disadvantages, but the most common classical method for the synthesis of benzothiazole recently in use is based on cyclization of substituted aniline in the presence of potassium thiocyanate achieved through oxidation by bromine. Structure activity relationships of benzothiazoles have been of great interest because, change in S and N, nucleophilicity with change of functional groups along with its biological activities [19]. Since it is well known that lead optimization is mainly based on the cyclization and structural elaboration by attachment of substituent groups either on the benzene or heterocyclic rings. Although, reported relationships between the structure of the heterocyclic scaffold and substituent groups reveal that the nature of the heterocyclic ring is the main base, associated with biological activity. It also reveals that change in biological activity with the presence of substituent in different positions of benzothiazole moiety [20-22]. The aim of this study was to synthesized and determines the antifungal activity of novel compounds against Aspergillus Niger to established further understanding of the biological and investigate structure-activity relationships among them.

Materials and Methods

Synthesis of Substituted Benzothiazole (1-SB)

Synthesis of substituted benzothiazole nucleus was achieved by adding 8gm (0.08mol) of potassium thiocyanate and 1.45g (0.01mol) of substituted aniline to 20ml cooled glacial acetic acid in such a way to temperature not exceeded above room temperature. Temperature of reaction was controlled by placing mixture in freezing mixture of ice and salt with mechanically stirring. Solution of 1.6ml of bromine in 6ml of glacial acetic acid was added using dropping funnel. Time taken for addition of bromine was around 105 minute with special precaution was taken that the temperature never rose beyond room temperature. When addition of bromine was completed the solution was stirred for 2 hours below room temperature and at room temperature for 10 hours. Then mixture allowed stand overnight to get an orange precipitate was settle at the bottom. 6ml water was added and heated at 850C on a steam bath and filtered hot (Filtrate-01). The residue was heated with 10ml of glacial acetic acid at 850C and filtered hot (Filtrate-02). The filtrate 01 and 02 were combined and cooled. Precipitate was collected when it neutralized with concentrated ammonia solution to pH 6. Finally treated with animal charcoal and recrystalised from benzene, ethanol of (1:1) to get substituted benzothiazole (1-SB, 66%yeild).

Synthesis of Nitrobenzamide (2-SB, 3-SB, and 4-SB)

Intermediate nitrobenzamide compound 2-SB, 3-SB and 4-SB were synthesized by dissolving 5.36g (0.026mol) of substituted nitrobenzoylchloride in 50ml dry acetone. The solution was added drop wise with continuous stirring at room temperature into a solution of 5.22g (0.026mol) of product of 1-SB in dry pyridine (50ml). Stirring was continued for another 30 minutes after addition. Finally transferred into ice cold water (200ml) and recrystalized with ethanol.

Synthesis of Compound D-1 to D-9

The final novel compounds (D-1 to D-9) were synthesized by separate refluxing of 2.7g (0.0075 mol) of product 2-SB, 3-SB and 4-SB with 0.008 mol of 2 (3 or 4) nitro substituted aniline for 2 hrs in presence of DMF (dimethyl formamide). The mixture was cooled at room temperature and poured into crushed ice and solid separated after filtration. The separated solid was dried and recrystalized with super dry alcohol.

Analytical Characterization

During the synthesis the reaction progress was closely monitored by thin layer chromatography using solvent system butanol: ethyl acetate: benzene [1:2:1] and detection performed by exposing them to iodine vapors. Open capillaries method was used to determine melting points of the synthesized compounds. Structure elucidation of compounds were done by IR spectra (KBr pellet technique) were recorded using a SHIMADZU (8400S), spectrophotometer. IR spectral study showed frequency range for Ar-C=C, C=O, C-S, C-NO2. 1H NMR spectra were recorded using CDCL3 as a solvent and tetramethylsilane (TMS) as an internal standard on Bruker AM 400 instrument (at 400 MHz).

Antifungal activity against Aspergillus Niger

The synthesized compounds are screened against selected fungal strains Aspergillus Niger by using diffusion method and griseoflavin used as a standard drug. The 48 hours old fungal culture inoculated into nutrient broth by following aseptic techniques and incubated for 48 hours at 37± 20C in an incubator. This culture mixed with Potato-dextrose agar media (20%) and poured into petriplates. After solidification five bores are made at equal distance by using sterile steel cork borer (8mm in diameter). Into these cups different concentrations (50μg/ml and 100μg/ml) of standard drug and synthesized compounds along with control (Dimethyl formamide) introduced. After introduction of standard drug and compounds, these plates are placed in a refrigerator at 8-100C for two hours for proper diffusion of the drugs. After 2 hours of cold incubation, the petriplates are transferred to incubator and maintained at 37±20C for 24-36 hours. After the incubation period, the plates were observed for zone of inhibition by using verniar scale. Results evaluated by comparing the zone of inhibition shown by the synthesized compounds with standard drug. The results are the mean value of zone of inhibition measured in millimeter of two preparation of sample (Synthesized compounds) and standard drug.

Result and Discussion

Benzothiazole contains Sulphar and nitrogen as heteroatom but impart biological activity while substitution at C-2, C-6 and C-7 position. Although, C-2 and C-6 position in substituted aniline found to be the most positive center but C-2 position behaves as a more electrophilic centre. However attack preferably at C-2 position, which was the electrophilic center and it is probable that bromine being as pseudo halogen, behaves as an electrophile by attacking this electrophilic center followed by replacement of hydrogen of C-2 position as one hydrogen bromide while one bromine atom remain attached. Thiocyanogen replaced bromine and behaves as a pseudo halogen (electrophile) followed by elimination of potassium bromide. Rearrangement produces substituted benzothiazole through ring closure when pH adjusted at pH6 with ammonia.

In the present work efforts have been made to synthesized newer derivatives having methyl substitution at C-6 position of benzothiazole while 2-(3 or 4)-aryl-NO2 considered as rotating substitution at C-2 and C-7 position of benzothiazole nucleus to find out influence of activity due to change in substitution position (Figure 1). The Basic fact behind frequent use of nitro group as substituent is that the bacteria only rarely acquire resistance; hence compound seems to be more effective against bacterial infection even it was revealed that inherent toxicity of nitro group is very low that allow compound to be safe also. Analytical characterization was performed using TLC, melting point, while structural elucidation was done by IR and NMR. Reaction progress was monitored by thin layer chromatography. It was found that the distance traveled by the sample was found to be different from that of the parent compound spotted along with it and confirmed that synthesized compounds were different from parent compound. Since all samples gave a single spot, the compounds were taken to be free from impurities. Analytical characterization data confirmed structure of newly synthesized compounds (D-1 to D-9). Structure of newly synthesized compounds confirmed by 1HNMR which clearly indicated a sharp characteristic signal at 7.14-7.60ppm is assigned to NH proton (benzothiazole) in all the synthesized compounds (Table 1). The synthesized compounds are screened against selected fungal strains Aspergillus Niger by using diffusion method at two concentration 50 and 10050μg/ml using griseoflavin as a standard drug. In the screening, it was found that compound D-5 exhibited promising inhibitory activity while compound D-6, D-8, D-9 showed moderate activity and rest of compounds not compete for better activity or can be consider as mild active (Table 2).

Figure 1: Synthetic scheme

Table 1: Analytical characterization of newly synthesized compounds.

Table 2: Result of antifungal activity.

Conclusion

In the present work substituted benzothiazole nucleus synthesized from substituted aniline followed by condensation with nitrobenzoylchloride. To the above product 2-nitroaniline, 3-nitroaniline, 4-nitroaniline in presence of DMF were treated to get newly synthesized derivatives (D-1 to D-09) through replacing at 7th position chlorine. Analytical characterization data confirmed structure of newly synthesized compounds (D-1 to D-9). Synthesized compounds were evaluated for antifungal activity using fungal strain of Aspergillus niger by cup plate method (diffusion technique) at two different concentration 50μg/ml and 100μg/ml. Among, all newly synthesized derivatives compound D-5 showed potent.

Read More About Lupine Publishers Journal of Skin Diseases Please Click on Below Link
https://lupine-respiratory-skin-and-diseases.blogspot.com/