Failure Analysis of Thermo-Mechanically Treated (TMT) Bar During Bending Operation: A Metallurgical Investigation by Souvik Das in Trends in Civil Engineering and its Architecture in Lupine Publishers
For more Lupine Publishers Open Access Journals Please visit our website: https://lupinepublishers.us/
For more Civil Engineering Research Journal articles Please Click Here: https://lupinepublishers.com/civil-engineering-journal/
TMT bars means Thermo Mechanically Treated Bars made from medium
carbon steel (Carbon 0.25 Max Wt. %) and are used in
construction industry. Because of its corrosion and rust resistance
features it is widely used in construction of buildings in humid
areas as well as long lasting, high strength, quality construction.
Quality aspects of these rebar’s are of significance as any inherent
abnormality in the material could lead to unwanted productivity losses
or quality claims. In this present study, rebar samples failed
during bending operation were collected from construction end for
understanding their quality aspect and potential causes of
failure while bending. Visual observations of rebar sample (U-bend)
longitudinal surface defects were observed in both the tension
and compression zone. On appearance, metal folded over the rebar
surfaces at an angle. Detailed microstructural investigation
revealed that scale entrapment in defects. The above observations
indicated that the defect was of lap type and which was generated
during hot rolling process.
TMT ( Thermo-mechanical treated) rebar is the time proven
match for reinforcing concrete structures on accounts of similarity
in thermal expansion, ability to bond well with concrete and, above
all, the ability to shoulder most of the tensile stress acting on the
structure [1]. TMT bars means Thermo Mechanically Treated
Bars made from medium carbon steel (Carbon 0.25 Max Wt. %)
and are used in construction industry. Because of its corrosion
and rust resistance features it is widely used in construction of
buildings in humid areas as well as long lasting, high strength,
quality construction [1]. Rebars are “hot rolled” from steel billets
and subjected to on-line thermo-mechanical treatment in three
successive stages.
For more Lupine Publishers Open Access Journals Please visit our website: https://lupinepublishers.us/
For more Civil Engineering Research Journal articles Please Click Here: https://lupinepublishers.com/civil-engineering-journal/
No comments:
Post a Comment
Note: only a member of this blog may post a comment.