To produce concrete, cement is an essential material that binds together solid bodies but also is the largest producer of carbon
dioxide (CO2) emission. Up to 10% of global CO2
emission comes from cement production thus making the sustainability of
concrete
a major issue that needs addressing. The processes of producing concrete
consume heavily on natural resources such as sand,
gravel, water, coal and crushed rock, mining of which damages the
environment. It is however possible, that energy and cost
efficiency can be achieved by reducing on the amount of clinker, and in
its place utilizing partial cement replacements/pozzolans
that require less process heating and emit fewer levels of carbon
dioxide. This study investigates the effectiveness of agro waste
ash by-product Palm Oil Fuel Ash (POFA) as an alternative material to
replace Portland cement (OPC). Experiments were carried
out by supplementing CEM I cement by weight in concrete mixes with POFA
at 2.5%, 5%, 10%, 15% and 20% steps at the point of
need, with water to cement ratio of 0.5. Results were compared with a
control specimen, which was made with 100% cement. The
results showed impressive compressive strength, especially at early age;
in fact POFA specimens containing 2.5% and 5% POFA
replacement displayed greater early compressive strength in comparison
to the control, which is similar in behaviour to concrete
containing silica fume which is an established partial cement
replacement used in high strength applications. The results showed
good repeatability and highlight the potential of POFA as an effective
pozzolan which could enhance the sustainability and economic
aspect of concrete.to know more click on below link.
For more Lupine Publishers Open Access Journals Please visit our website: http://www.lupinepublishers.com/
For more open access material science journals articles Please Click Here: https://lupinepublishers.com/material-science-journal/
For more open access material science journals articles Please Click Here: https://lupinepublishers.com/material-science-journal/
No comments:
Post a Comment
Note: only a member of this blog may post a comment.